Chapter 7
Subsection NC, ND—Class 2 and 3 Components


Chapter 7, authored by Thomas J. Ahl for the first Edition, and co-authored by Marcus N. Bressler for the second Edition, provides commentary on Section III, Subsections NC and ND. This commentary addresses pressure vessels, atmospheric tanks, and 0–15 psig tanks as presented in the ASME B&PV Code, Section III, Division 1, Subsection NC, Class 2 Components and Subsection ND, Class 3 Components. This chapter does not address piping, pumps, and valves; these are addressed in Chapters XX for Class 2 and Class 3 Piping, and in Chapter 13 for Nuclear Pumps and Valves. The chapter discusses, in order, each of the eight major Code Articles: Introduction; Materials; Design, Fabrication and Installation; Examination; Testing; Overpressure Protection and Name Plates; and Stamping and Reports. In the 1971 Edition, Subsection NB was fully developed in the evolution of the Nuclear Codes; all other were written by using the outline established for NB. Consequently, many of the basic Paragraphs contained in Subsection NB and other reference documents were included verbatim in both Subsections NC and ND, when the subsections were published as separate volumes in the 1974 Edition.

Subsections NC and ND are a combination of rules and requirements taken from Section III, Subsection NB; Section VIII, 9.5 In Chapter 7, Thomas has referenced all of these Codes and meticulously identified both obvious and subtle differences between Subsection NB, the parent Code, and Subsections NC and ND. Thus, because Thomas addresses the Articles of Subsections NC and ND in this part of the commentary, he presents comparisons, the most probable source of origin of the Code requirements, certain insights as well as contradictions that seem to exist, and the specific source document and some of the underlying theory. He provides cross-references to other Code Sections∕Subsections∕Paragraphs where applicable. Marcus has taken this work and simplified it where possible, and updated it to the 2004 Edition.

  • 7.1 Articles NC-1000 and ND-1000 (Introduction)
  • 7.2 Articles NC-2000 and ND-2000, Material
  • 7.3 Articles NC-3000 and ND-3000 (Design)
  • 7.4 Articles NC-4000 and ND-4000 (Fabrication and Installation)
  • 7.5 Articles NC-5000 and ND-5000 (Examination)
  • 7.6 Articles NC-6000 and ND-6000 (Testing)
  • 7.7 Articles NC-7000 and ND-7000 (Overpressure Protection)
  • 7.8 Articles NC-8000 and ND-8000 (Nameplate, Stamping, and Reports)
  • 7.9 Summary of Changes
  • 7.10 Summary of Changes
  • 7.11 References

Related Content

Customize your page view by dragging and repositioning the boxes below.

Related Journal Articles
Related eBook Content
Topic Collections

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In