Skip Nav Destination
Issues
1903
This article was originally published in
Transactions of the American Society of Mechanical Engineers
ISSN 0097-6822
In this Issue
Research Papers
Apparatus for Obtaining a Continuous Record of the Position of an Engine Governor and the Speed of the Engine Which It Is Governing
Trans. ASME. January 1903, 24: 78–97.
doi: https://doi.org/10.1115/1.4060596
Flywheel Capacity for Engine-Driven Alternators
Trans. ASME. January 1903, 24: 98–110.
doi: https://doi.org/10.1115/1.4060597
The Deflection of Beams by Graphics
Trans. ASME. January 1903, 24: 116–136.
doi: https://doi.org/10.1115/1.4060599
Topics:
Deflection
Finer Screw Threads
Trans. ASME. January 1903, 24: 137–140.
doi: https://doi.org/10.1115/1.4060600
Topics:
Screw threads
A New Oil-Testing Machine and Some of Its Results
Trans. ASME. January 1903, 24: 143–155.
doi: https://doi.org/10.1115/1.4060602
Filing System for Office Use
Trans. ASME. January 1903, 24: 161–166.
doi: https://doi.org/10.1115/1.4060604
Entropy Analysis of the Otto Cycle
Trans. ASME. January 1903, 24: 171–181.
doi: https://doi.org/10.1115/1.4060606
Topics:
Entropy
,
Otto cycle
A Rational Solution of the Problem of Weights and Measures
Trans. ASME. January 1903, 24: 184–201.
doi: https://doi.org/10.1115/1.4060608
Topics:
Measurement units and standards
Centrifugal Machines and Their Uses
Trans. ASME. January 1903, 24: 216–241.
doi: https://doi.org/10.1115/1.4060610
Topics:
Machinery
A Forty-Four-Foot Pit Lathe
Trans. ASME. January 1903, 24: 243–247.
doi: https://doi.org/10.1115/1.4060612
Gift Propositions for Paying Workmen
Trans. ASME. January 1903, 24: 250–257.
doi: https://doi.org/10.1115/1.4060614
Heat Resistance, the Reciprocal of Heat Conductivity
Trans. ASME. January 1903, 24: 278–285.
doi: https://doi.org/10.1115/1.4060616
Topics:
Heat
,
Thermal conductivity
An Analysis of the “Commercial” Value of Water-Power per Horse-Power per Annum
Trans. ASME. January 1903, 24: 286–306.
doi: https://doi.org/10.1115/1.4060617
Topics:
Hydropower
Topical Discussions and Notes of Experience
F. R. Hutton, A. Bement, E. P. Bates, Gus C. Henning, H. de B. Parsons, F. J. Miller, Albert Kingsbury, Suplee, Francis H. Richards, W. J. Wilcox, Walter S. Arnold, Arthur L. Williston, William Kent, Fowler, John Platt, S. Ashton Hand, H. T. Yaryan, Charles Ekstrand, D. J. Lewis, F. Meriam Wheeler, John C. Kafer, H. B. Roelker, E. A. Darling, W. T. Bonner, P. H. Grimm, O. C. Woolson, H. A. Bang, G. I. Rockwood, A. H. Raynal, C. L. Newcomb, Jesse M. Smith, W. A. Pierson, John Fritz, James G. Winship, James Christie, F. H. Laforge, H. P. Jones, E. R. Markham, Oberlin Smith, Rogers, Charles L. Gabriel
Trans. ASME. January 1903, 24: 315–359.
doi: https://doi.org/10.1115/1.4060619
The Use of a Surveying Instrument in Machine Shop Practice
Trans. ASME. January 1903, 24: 360–382.
doi: https://doi.org/10.1115/1.4060620
Topics:
Instrumentation
,
Machine shop practice
,
Surveying
Rotary Pumps
Trans. ASME. January 1903, 24: 385–393.
doi: https://doi.org/10.1115/1.4060622
Topics:
Pumps
The Metric System
Trans. ASME. January 1903, 24: 397–466.
doi: https://doi.org/10.1115/1.4060624
Topics:
Metric system
United States Army Gun Factory, Watervliet Arsenal, N. Y.
Trans. ASME. January 1903, 24: 929–932.
doi: https://doi.org/10.1115/1.4060630
Topics:
Army
Test of a Hydraulic Elevator System
Trans. ASME. January 1903, 24: 933–940.
doi: https://doi.org/10.1115/1.4060631
Topics:
Elevators
A Rational Train Resistance Formula
Trans. ASME. January 1903, 24: 945–954.
doi: https://doi.org/10.1115/1.4060633
Topics:
Trains
The Bursting of Emery Wheels
Trans. ASME. January 1903, 24: 963–975.
doi: https://doi.org/10.1115/1.4060635
Topics:
Wheels
A Comparative Oil Test
Trans. ASME. January 1903, 24: 976–982.
doi: https://doi.org/10.1115/1.4060636
Turbine Flow Recorder
Trans. ASME. January 1903, 24: 983–991.
doi: https://doi.org/10.1115/1.4060637
Topics:
Flow (Dynamics)
,
Turbines
An Indicating Anglemeter
Trans. ASME. January 1903, 24: 992–998.
doi: https://doi.org/10.1115/1.4060638
The Steam Turbine from an Operating Standpoint: A Description and Test of a 400 Kw. Turbo-Generator
Trans. ASME. January 1903, 24: 999–1030.
doi: https://doi.org/10.1115/1.4060640
Topics:
Steam turbines
,
Turbogenerators
Alternating Current Motors for Variable Speed
Trans. ASME. January 1903, 24: 1037–1042.
doi: https://doi.org/10.1115/1.4060642
Topics:
Motors
A Method of Testing Gas Engines
Trans. ASME. January 1903, 24: 1050–1064.
doi: https://doi.org/10.1115/1.4060644
Topics:
Gas engines
,
Testing
Performance of an Internal Combustion Engine Using Kerosene and Gasoline as Fuel
Trans. ASME. January 1903, 24: 1065–1096.
doi: https://doi.org/10.1115/1.4060645
Topics:
Fuels
,
Gasoline
,
Internal combustion engines
Tests of a Twelve-Horse-Power Gas Engine to Determine the Effects of Changes in Speed, Load, Point of Ignition, Ratio of Gas to Air, and Jacket Temperature
Trans. ASME. January 1903, 24: 1097–1125.
doi: https://doi.org/10.1115/1.4060646
Topics:
Engines
,
Ignition
,
Stress
,
Temperature
Some Data on Hoisting Hooks
Trans. ASME. January 1903, 24: 1126–1129.
doi: https://doi.org/10.1115/1.4060648
Strains Produced by Excessive Tightening of Nuts
Trans. ASME. January 1903, 24: 1137–1138.
doi: https://doi.org/10.1115/1.4060650
The Hot Well as an Oil Extractor
Trans. ASME. January 1903, 24: 1144–1147.
doi: https://doi.org/10.1115/1.4060652
Positive Governor Drives for Corliss Engines
Trans. ASME. January 1903, 24: 1151–1155.
doi: https://doi.org/10.1115/1.4060654
Fits and Fitting: An Investigation of Recent Practice in Forcing, Shrinking, Driving and Running Fits, and Limits for Limit Gauges
Trans. ASME. January 1903, 24: 1158–1173.
doi: https://doi.org/10.1115/1.4060656
Topics:
Fittings
,
Gages
,
Shrinkage (Materials)
The Experiment Boiler of the Ohio State University, with Results of Some Trials
Trans. ASME. January 1903, 24: 1193–1234.
doi: https://doi.org/10.1115/1.4060658
Topics:
Boilers
Drawing Office Equipment
Trans. ASME. January 1903, 24: 1254–1271.
doi: https://doi.org/10.1115/1.4060660
Water and Heat Consumption of a Compound Engine at Various Powers
Trans. ASME. January 1903, 24: 1274–1282.
doi: https://doi.org/10.1115/1.4060662
Description of Sixty-Foot Vertical Boring and Turning Mill Designed by John Riddell for General Electric Co.
Trans. ASME. January 1903, 24: 1288–1301.
doi: https://doi.org/10.1115/1.4060664
Topics:
Turning
The Machine Shop Problem
Trans. ASME. January 1903, 24: 1302–1320.
doi: https://doi.org/10.1115/1.4060665
Topics:
Machine shops
A Graphical Daily Balance in Manufacture
Trans. ASME. January 1903, 24: 1322–1331.
doi: https://doi.org/10.1115/1.4060667
Discussions and Closures
Discussion: “Flywheel Capacity for Engine-Driven Alternators” (Slichter, Walter I., 1903, Trans. ASME, 24, pp. 98–110)
Trans. ASME. January 1903, 24: 110–115.
doi: https://doi.org/10.1115/1.4060598
Discussion: “Finer Screw Threads” (Porter, Charles T., 1903, Trans. ASME, 24, pp. 137–140)
Trans. ASME. January 1903, 24: 140–142.
doi: https://doi.org/10.1115/1.4060601
Topics:
Screw threads
Discussion: “A New Oil-Testing Machine and Some of Its Results” (Kingsbury, Albert, 1903, Trans. ASME, 24, pp. 143–155)
Trans. ASME. January 1903, 24: 155–160.
doi: https://doi.org/10.1115/1.4060603
Discussion: “Filing System for Office Use” (Lane, Henry M., 1903, Trans. ASME, 24, pp. 161–166)
Geo. L. Fowler, Wm. W. Crosby, W. E. Partridge, L. R. Pomeroy, H. H. Suplee, H. W. Spangler, Henry M. Lane
Trans. ASME. January 1903, 24: 166–170.
doi: https://doi.org/10.1115/1.4060605
Discussion: “Entropy Analysis of the Otto Cycle” (Reeve, Sidney A., 1903, Trans. ASME, 24, pp. 171–181)
Trans. ASME. January 1903, 24: 182–183.
doi: https://doi.org/10.1115/1.4060607
Topics:
Entropy
,
Otto cycle
Discussion: “A Rational Solution of the Problem of Weights and Measures” (Reeve, Sidney A., 1903, Trans. ASME, 24, pp. 184–201)
Trans. ASME. January 1903, 24: 201–215.
doi: https://doi.org/10.1115/1.4060609
Topics:
Measurement units and standards
Discussion: “Centrifugal Machines and Their Uses” (Viola, Bartholomew, 1903, Trans. ASME, 24, pp. 216–241)
Trans. ASME. January 1903, 24: 242.
doi: https://doi.org/10.1115/1.4060611
Topics:
Machinery
Discussion: “A Forty-Four-Foot Pit Lathe” (Barnay, John M., 1903, Trans. ASME, 24, pp. 243–247)
Trans. ASME. January 1903, 24: 247–249.
doi: https://doi.org/10.1115/1.4060613
Discussion: “Gift Propositions for Paying Workmen” (Richards, Frank, 1903, Trans. ASME, 24, pp. 250–257)
Frank Richards, William Sangster, W. D. Ennis, E. S. Boyer, H. M. Norris, H. L. Gantt, Chas. F. McGill, F. H. Boyer, H. H. Suplee, E. D. Meier, W. S. Rogers, G. I. Alden, Fred J. Miller, F. A. Halsey, Frank Richards
Trans. ASME. January 1903, 24: 257–277.
doi: https://doi.org/10.1115/1.4060615
Discussion: “An Analysis of the “Commercial” Value of Water-Power per Horse-Power per Annum” (Nagle, A. F., 1903, Trans. ASME, 24, pp. 286–306)
Trans. ASME. January 1903, 24: 306–314.
doi: https://doi.org/10.1115/1.4060618
Topics:
Hydropower
Discussion: “The Use of a Surveying Instrument in Machine Shop Practice” (Tyler, Charles C., 1903, Trans. ASME, 24, pp. 360–382)
Trans. ASME. January 1903, 24: 382–384.
doi: https://doi.org/10.1115/1.4060621
Topics:
Instrumentation
,
Machine shop practice
,
Surveying
Discussion: “Rotary Pumps” (Wilkin, John T., 1903, Trans. ASME, 24, pp. 385–393)
Trans. ASME. January 1903, 24: 393–396.
doi: https://doi.org/10.1115/1.4060623
Topics:
Pumps
Discussion: “The Metric System” (Halsey, F. A., 1903, Trans. ASME, 24, pp. 397–466)
Charles E. Adams, Eugene W. Lyttle, C. A. Bates, C. H. Tittmann, Gus G. Henning, R. C. Alexander, F. A. Halsey, Geo. W. Colles, Henry S. Pritchett, A. E. Kennelly, Samuel Webber, Fred. H. Colvin, James Christie, Fred. J. Miller, C. J. H. Woodbury, W. W. Crosby, Samuel S. Dale, Paul Lamoitier, S. W. Stratton, J. H. Southard, F. A. Geier, Suplee, Kent, Dodge, Warren, H. R. Towne, Spencer Miller, C. R. Gabriel, George S. Morison, C. V. Kerr, H. D. Sharpe, P. A. Sanguinetti
Trans. ASME. January 1903, 24: 466–628.
doi: https://doi.org/10.1115/1.4060625
Topics:
Metric system
Discussion: “Discussion on the Preliminary Forms of the Report of Committee on Standardizing Engine Tests” (1903, Trans. ASME, 24, pp. 713–790)
R. H. Thurston, H. Wade Hibbard, A. F. Nagle, W. W. Christie, Arthur J. Frith, F. H. Ball, William Kent, Wm. O. Webber, R. S. Hale, Charles H. Manning, A. K. Mansfield, H. W. Spangler, J. B. Stanwood, Charles A. Hague, Charles L. Heisler, Wm. S. Monroe, E. T. Sederholm, Gaetano Lanza, Sidney A. Reeve, W. H. Morse, R. A. Smart
Trans. ASME. January 1903, 24: 791–846.
doi: https://doi.org/10.1115/1.4060628
Topics:
Engines
Discussion: “Test of a Hydraulic Elevator System” (Bolton, Reginald Pelham, 1903, Trans. ASME, 24, pp. 933–940)
Trans. ASME. January 1903, 24: 940–944.
doi: https://doi.org/10.1115/1.4060632
Topics:
Elevators
Discussion: “A Rational Train Resistance Formula” (Blood, John Balch, 1903, Trans. ASME, 24, pp. 945–954)
Trans. ASME. January 1903, 24: 955–962.
doi: https://doi.org/10.1115/1.4060634
Discussion: “An Indicating Anglemeter” (Sargent, C. E., 1903, Trans. ASME, 24, pp. 992–998)
Trans. ASME. January 1903, 24: 998.
doi: https://doi.org/10.1115/1.4060639
Discussion: “The Steam Turbine from an Operating Standpoint: A Description and Test of a 400 Kw. Turbo-Generator” (Waldron, Fredk. A., 1903, Trans. ASME, 24, pp. 999–1030)
Trans. ASME. January 1903, 24: 1031–1036.
doi: https://doi.org/10.1115/1.4060641
Topics:
Steam turbines
,
Turbogenerators
Discussion: “Alternating Current Motors for Variable Speed” (Slichter, W. I., 1903, Trans. ASME, 24, pp. 1037–1042)
Trans. ASME. January 1903, 24: 1042–1049.
doi: https://doi.org/10.1115/1.4060643
Topics:
Motors
Discussion: “Tests of a Twelve-Horse-Power Gas Engine to Determine the Effects of Changes in Speed, Load, Point of Ignition, Ratio of Gas to Air, and Jacket Temperature” (Robertson, C. H., 1903, Trans. ASME, 24, pp. 1097–1125)
Trans. ASME. January 1903, 24: 1125.
doi: https://doi.org/10.1115/1.4060647
Topics:
Engines
,
Ignition
,
Stress
,
Temperature
Discussion: “Some Data on Hoisting Hooks” (Bacon, John L., 1903, Trans. ASME, 24, pp. 1126–1129)
Trans. ASME. January 1903, 24: 1129–1136.
doi: https://doi.org/10.1115/1.4060649
Discussion: “Strains Produced by Excessive Tightening of Nuts” (Bement, A., 1903, Trans. ASME, 24, pp. 1137–1138)
Oberlin Smith, Fred F. Miller, Gus. C. Henning, McGeorge, A. E. Johnson, Saunders, Sweeney, A. Bement
Trans. ASME. January 1903, 24: 1138–1143.
doi: https://doi.org/10.1115/1.4060651
Discussion: “The Hot Well as an Oil Extractor” (Eldredge, A. H., 1903, Trans. ASME, 24, pp. 1144–1147)
Trans. ASME. January 1903, 24: 1147–1150.
doi: https://doi.org/10.1115/1.4060653
Discussion: “Positive Governor Drives for Corliss Engines” (Eldredge, A. H., 1903, Trans. ASME, 24, pp. 1151–1155)
Trans. ASME. January 1903, 24: 1155–1157.
doi: https://doi.org/10.1115/1.4060655
Discussion: “Fits and Fitting: An Investigation of Recent Practice in Forcing, Shrinking, Driving and Running Fits, and Limits for Limit Gauges” (Moore, Stanley H., 1903, Trans. ASME, 24, pp. 1158–1173)
Trans. ASME. January 1903, 24: 1173–1192.
doi: https://doi.org/10.1115/1.4060657
Topics:
Fittings
,
Gages
,
Shrinkage (Materials)
Discussion: “The Experiment Boiler of the Ohio State University, with Results of Some Trials” (Hitchcock, E. A., 1903, Trans. ASME, 24, pp. 1193–1234)
Trans. ASME. January 1903, 24: 1235–1253.
doi: https://doi.org/10.1115/1.4060659
Topics:
Boilers
Discussion: “Drawing Office Equipment” (McGeorge, John, 1903, Trans. ASME, 24, pp. 1254–1271)
Trans. ASME. January 1903, 24: 1271–1273.
doi: https://doi.org/10.1115/1.4060661
Discussion: “Water and Heat Consumption of a Compound Engine at Various Powers” (Jacobus, D. S., 1903, Trans. ASME, 24, pp. 1274–1282)
Trans. ASME. January 1903, 24: 1283–1287.
doi: https://doi.org/10.1115/1.4060663
Discussion: “The Machine Shop Problem” (Day, Charles, 1903, Trans. ASME, 24, pp. 1302–1320)
Trans. ASME. January 1903, 24: 1320–1321.
doi: https://doi.org/10.1115/1.4060666
Topics:
Machine shops
Discussion: “A Graphical Daily Balance in Manufacture” (Gantt, H. L., 1903, Trans. ASME, 24, pp. 1322–1331)
Trans. ASME. January 1903, 24: 1331–1336.
doi: https://doi.org/10.1115/1.4060668
Discussion: “Shop Management” (Taylor, Fred. W., 1903, Trans. ASME, 24, pp. 1337–1456)
Henry R. Towne, F. F. Du Brul, John T. Hawkins, H. Emerson, F. A. Halsey, Oberlin Smith, Ayres, Gantt, John Balch Blood, H. M. Lane, Henshaw, Wm. Kent, Gus. C. Henning, Fred. W. Taylor
Trans. ASME. January 1903, 24: 1456–1480.
doi: https://doi.org/10.1115/1.4060670
Discussion: “Topical Discussions and Notes of Experience” (Neff, E. H., Sanguinetti, Percy A., and Breckenridge, L. P., 1903, Trans. ASME, 24, pp. 1481–1486)
Trans. ASME. January 1903, 24: 1486–1491.
doi: https://doi.org/10.1115/1.4060672
Reports
Report of Committee Appointed to Discuss the Arguments in Favor of and Against the Metric System
Trans. ASME. January 1903, 24: 630–712.
doi: https://doi.org/10.1115/1.4060626
Topics:
Metric system
Final Report of the Committee Appointed to Standardize a System of Testing Steam Engines
Trans. ASME. January 1903, 24: 713–790.
doi: https://doi.org/10.1115/1.4060627
Topics:
Steam engines
,
Testing
Specifications for Boiler Plate, Rivet Steel, Steel Castings and Steel Forcings
Trans. ASME. January 1903, 24: 921–928.
doi: https://doi.org/10.1115/1.4060629
Email alerts
RSS Feeds
Data-Driven Sparse Reconstruction of Three-Dimensional Steady and Unsteady Flow Fields in a Centrifugal Impeller
J. Fluids Eng (October 2025)
