Abstract
In this paper, the finite element method (FEM) is conducted for thermal and mechanical analysis of a half 2D axisymmetric welded rotor model. The temperature results after welding are obtained and supported by the experiment results. Furthermore, the thermal strain and residual stress of the weld are analyzed in detail by considering solid-state phase transformation (SSPT). Besides, parametric optimization method is adopted to optimize the region of large stress distribution. By choosing the weld pass number as the optimized parameter, the area decreases by 5.4% when the optimal pass number is 18. The axial and hoop stress distributions are obtained at the inner and outer surfaces near the weld for the better stress distribution.
Issue Section:
Technical Briefs
References
1.
Kim
,
G. S.
,
Indacochea
,
J. E.
, and
Spry
,
T. D.
, 1988
, “
Weldability Studies in Cr-Mo-V Turbine Rotor Steel
,” J. Mater. Eng.
,
10
(2
), pp. 117
–132
.10.1007/BF028338682.
Sheiko
,
V. S.
,
Cherednichenko
,
T. G.
, and
Koval'chenko
,
A. V.
, 1992
, “
Properties of Elements of the Welded Rotor of Steel 25Kh2NMFA After Final Heat Treatment
,” Met. Sci. Heat Treat.
,
34
(8
), pp. 512
–514
.10.1007/BF007750043.
Liu
,
X.
,
Ji
,
H.
,
Liu
,
P.
,
Wang
,
P.
,
Lu
,
F.
, and
Gao
,
Y.
, 2014
, “
Characterization of the Structural Details of Residual Austenite in the Weld Metal of a 9Cr1MoNbV Welded Rotor
,” Int. J. Miner., Metall., Mater.
,
21
(6
), pp. 563
–568
.10.1007/s12613-014-0942-54.
Deng
,
D.
,
Luo
,
Y.
,
Serizawa
,
H.
,
Shibahara
,
M.
, and
Murakawa
,
H.
, 2003
, “
Numerical Simulation of Residual Stress and Deformation Considering Phase Transformation Effects
,” Trans. JWRI
,
32
(2
), pp. 325
–333
.https://www.researchgate.net/publication/43140834_Numerical_Simulation_of_Residual_Stress_and_Deformation_Considering_Phase_Transformation_EffectsMechanics_Strength_Structural_Design5.
Deng
,
D.
, 2009
, “
FEM Prediction of Welding Residual Stress and Distortion in Carbon Steel Considering Phase Transformation Effects
,” Mater. Des.
,
30
(2
), pp. 359
–366
.10.1016/j.matdes.2008.04.0526.
Deng
,
D.
, and
Murakawa
,
H.
, 2006
, “
Numerical Simulation of Temperature Field and Residual Stress in Multi-Pass Welds in Stainless Steel Pipe and Comparison With Experimental Measurements
,” Comput. Mater. Sci.
,
37
(3
), pp. 269
–277
.10.1016/j.commatsci.2005.07.0077.
Deng
,
D.
,
Murakawa
,
H.
, and
Liang
,
W.
, 2008
, “
Numerical and Experimental Investigations on Welding Residual Stress in Multi-Pass Butt-Welded Austenitic Stainless Steel Pipe
,” Comput. Mater. Sci.
,
42
(2
), pp. 234
–244
.10.1016/j.commatsci.2007.07.0098.
Brickstad
,
B.
, and
Josefson
,
B. L.
, 1998
, “
A Parametric Study of Residual Stresses in Multi-Pass Butt-Welded Stainless Steel Pipes
,” Int. J. Pressure Vessels Piping
,
75
(1
), pp. 11
–25
.10.1016/S0308-0161(97)00117-89.
Tan
,
L.
,
Zhang
,
J.
,
Zhuang
,
D.
, and
Liu
,
C.
, 2014
, “
Influences of Lumped Passes on Welding Residual Stress of a Thick-Walled Nuclear Rotor Steel Pipe by Multipass Narrow Gap Welding
,” Nucl. Eng. Des.
,
273
, pp. 47
–57
.10.1016/j.nucengdes.2014.01.02410.
Tan
,
L.
,
Zhang
,
L.
,
Zhang
,
J.
, and
Zhuang
,
D.
, 2014
, “
Effect of Geometric Construction on Residual Stress Distribution in Designing a Nuclear Rotor Joined by Multipass Narrow Gap Welding
,” Fusion Eng. Des.
,
89
(4
), pp. 456
–465
.10.1016/j.fusengdes.2014.03.08011.
Feng
,
L.
, and
Xuan
,
F.
, 2015
, “
Release and Redistribution of Residual Stress in the Welded Turbine Rotor Under Service-Type Loadings
,” Nucl. Eng. Des.
,
295
, pp. 500
–510
.10.1016/j.nucengdes.2015.08.01412.
Duranton
,
P.
,
Devaux
,
J.
,
Robin
,
V.
,
Gilles
,
P.
, and
Bergheau
,
J. M.
, 2004
, “
3D Modelling of Multipass Welding of a 316 L Stainless Steel Pipe
,” J. Mater. Process. Technol.
,
153–154
, pp. 457
–463
.10.1016/j.jmatprotec.2004.04.12813.
Cho
,
S. H.
, and
Kim
,
J. W.
, 2002
, “
Analysis of Residual Stress in Carbon Steel Weldment Incorporating Phase Transformations
,” Sci. Technol. Weld. Joining
,
7
(4
), pp. 212
–216
.10.1179/13621710222500425714.
Deng
,
D.
, and
Murakawa
,
H.
, 2008
, “
Finite Element Analysis of Temperature Field, Microstructure and Residual Stress in Multi-Pass Butt-Welded 2.25Cr–1Mo Steel Pipes
,” Comput. Mater. Sci.
,
43
(4
), pp. 681
–695
.10.1016/j.commatsci.2008.01.02515.
Yaghi
,
A. H.
,
Hyde
,
T. H.
,
Becker
,
A. A.
, and
Sun
,
W.
, 2008
, “
Finite Element Simulation of Welding and Residual Stresses in a P91 Steel Pipe Incorporating Solid-State Phase Transformation and Post-Weld Heat Treatment
,” J. Strain Anal. Eng. Des.
,
43
(5
), pp. 275
–293
.10.1243/03093247JSA37216.
Deng
,
D.
, and
Murakawa
,
H.
, 2006
, “
Prediction of Welding Residual Stress in Multi-Pass Butt-Welded Modified 9Cr–1Mo Steel Pipe Considering Phase Transformation Effects
,” Comput. Mater. Sci.
,
37
(3
), pp. 209
–219
.10.1016/j.commatsci.2005.06.01017.
Pardo
,
E.
, and
Weckman
,
D. C.
, 1989
, “
Prediction of Weld Pool and Reinforcement Dimensions of GMA Welds Using a Finite-Element Model
,” Metall. Mater. Trans. B
,
20
(6
), pp. 937
–947
.10.1007/BF0267019918.
Okagaito
,
T.
,
Ohji
,
T.
, and
Miyasaka
,
F.
, 2004
, “
UV Radiation Thermometry of TIG Weld Pool–Development of UV Radiation Thermometry (Report 1
),” Quart J. Jpn. Weld. Soc.
,
22
(1
), pp. 21
–26
.10.2207/qjjws.22.21Copyright © 2021 by ASME
You do not currently have access to this content.
